AlphaGate - Troubleshooting
- Quick access to troubleshooting guides below. Click here for all available information.
- 00. Check the main PCB, any LED diodes that is/isn't active.
- 01. Check that there is power to the gate
- 02. Check that the motor key switch is turned on.
- 03. Check dipswitch settings
- 04. Check connections of GateCOM cross-over cable by checking for the illuminated Saloon LED on the main PCB
- 05. Check potentiometer settings
- 06. Press test button on the main PCB on each gate
- 07. Next pair of gates doesn't open/close, check the PEC:s.
- 08. Next pair of gates doesn't open, check Gatecom cable.
- 09. Check the Childsafe sensor.
- 10. Check the radar sensor.
- 11. Check the coulisse cable / coulisse pcb.
- 12. Check if the gates are being held open by the remote controls. Check that CLEANING MODE is not activated by checking for the illuminated Cleaning LED on the Main PCB